Innosilicon A10 Pro 750MH 7g Ethereum Miner

Buy Innosilicon A10 Pro 750MH 7G Ethereum Miner in Dubai, UAE

Buy Innosilicon A10 Pro 750MH/s 7G in Dubai (WhatsApp +971555592696)

(UPDATED: Today) (VAT Invoice & DHL Delivery Available for GCC Countries)

Innosilicon A10 Pro 750MH/s 7G is one of the most successful Ethereum ASIC miner for Ethash algorithm mining on a power consumption of 1350W.

Innosilicon A10 Pro Ethereum miner is a new version of A10 with upgraded 7G memory to support the increasing size of DAG file and support continued Ehereum mining. It will continue to bring you the optimal mining experience with unbeatable computing power.

You may directly buy Innosilicon A10 Pro online.

Innosilicon A10 Pro is available for delivery in Dubai from 15th Jan 2021.

Buy / Sell Used Innosilicon A10 Pro here. You can buy online with your credit card / PayPal / BTC.

Innosilicon A10 Pro Specification

Brand NameInnosilicon
Product Model NumberA10 Pro (750MH/s) (7G Memory)
Hardware PlatformLinux
Operating SystemBuilt-in
Item Weight17.86 pounds / 8.1 kg
Product Dimensions14.25 x 5.35 x 11.22 inches
362 x 136 x 285
Item Dimensions
(L x W x H)
14.25 x 5.35 x 11.22 inches
362 x 136 x 285
Memory7 GB
Power / Voltage1350W (+/-10%)
Network InterfaceEthernet
Temperature / Humidity5 to 40 °C / 5 to 95%
Power AC Input210~240V
Power Frequency47~63Hz

Power Supply

The Innosilicon original PSU for A10 Pro 750MH/s is the recommended power supply for safe and efficient mining. 

Innosilicon A10 Pro PSU comes with 1 x AC input power cables at 10 Amps.

Since customers require different types of plugs, the PSU does not contain 220V AC cables. You may need to buy the standard IEC C14 AC power cable from any local computer or electrical store to use with the PSU.

Caution: Wrong input voltage may probably cause miner damaged and shall not be covered by the warranty.

Operating Condition

Max temperature 40°C, altitude 0m.

When the miner is used at an altitude from 900m to 2000m, the highest operating temperature decreases by 1℃ for every increase of 300m.

Ethash – Ethereum Mining Pools

Ethermine (Recommended) (PPLNS / 1%)

Sparkpool (Recommended) (PPS+ / 1%)

F2pool (PPS+ / 2.5%)

SpiderPool (PPS+ / 4%)

Nanopool (PPLNS / 1%)

Miningpoolhub (PPLNS / 0.9%)

Antpool (PPS+ / 4%, PPLNS / 0%, SOLO / 1%)

Hiveon (PPS+ / 0%)

Is Mining Ethereum Profitable?

Yes, Ethereum mining is still profitable if you have the Innosilicon A10 Pro miner and access to cheap electricity.

Innosilicon Warranty

All Innosilicon A10 Pro will be tested by factory before shipment and certified by Innosilicon and comes with 180 days warranty for the parts. However, that warranty comes with limitations. For example, the warranty won’t be valid if you overclock the miner (running it at a higher speed than it was designed to run). Also, if you use an inappropriate power supply or generate environmental damage to your miner you won’t be eligible for a warranty (e.g. lightning strike, corrosion due to the wet environment).

The following events will void the warranty:

  • Customer removes/replaces any components by himself without receiving permission from Innosilicon first
  • Damage caused by poor power supply, lightning or voltage surges
  • Burnt parts on hash boards or chips
  • Miner/boards/components damage due to water immersion or corrosion due to wet environment

If one of the cases above happens, you shall be charged for your miner maintenance services. For the specific procedures, please refer to the after-sales process.

If any problem, please leave an after-sales message on Innosilicon message board. Their technical support team will get in touch with you ASAP.

Please don’t send any machine or parts without contacting the technical support team first. Any loss or damage as a result of lack of contact will be the responsibility of the customer.

Note: Please ensure your miners are taken care in a proper farm with cooling and dust filter conditions. Warranty expires if you overclock miners or running miners at excessive heat or dust conditions beyond our target range.

For all repairs, within warranty or not, customer must return the defective parts at their own expense after opening a support ticket and troubleshooting with Innosilicon’s instructions. 

FAQs

How to reduce the noise of Innosilicon A10 Pro?
Try Liquid Cooled Crypto Mining Tank that can reduce Innosilicon A10 Pro noise levels and manage heat. Besides it will increase the hash rate resulting in more profits. This will allow you to run Ethereum ASIC miner inside the office or at home without disturbances. The enclosure can accommodate up to 20 Innosilicon A10 Pro miners per tank. 

What are the coins can you mine with Innosilicon A10 Pro (Ethash Algorithm)?
Ethereum (ETH), Ethereum Classic (ETC), QuarkChain (QKC), Expanse (EXP), Ubiq (UBQ), Pirl (PIRL), EtherGem (EGEM), Metaverse (ETP), Ellaism (ELLA), DubaiCoin (DBIX), Callisto (CLO), EtherSocial (ESN).

Leave a Reply

Your email address will not be published. Required fields are marked *